[[TitleIndustry]]

Acrylic products laser processing methods and techniques

Date:Feb 19, 2019

Significant advantages of plexiglass laser cutting of acrylic products

Fast speed: cutting speed up to 10M / MI

, the maximum positioning speed can reach 70 meters / MI

It is much faster than wire cutting.

The slit is narrow: the laser beam is focused into a small spot, so that the focus reaches a high power density, the material is quickly heated to the degree of vaporization, and the evaporation forms a hole that moves linearly with the beam and the material, so that the hole is continuously formed. A slit with a narrow width. The width of the slit is generally 0.10 0.20mm, and the precision is high: the positioning accuracy is 0.05mm.

,Repeatability

0.02 mm

The cutting quality is good: no contact cutting, the cutting edge is little affected by heat, and there is basically no thermal deformation of the workpiece, completely avoiding the collapse formed when the material is punched and sheared, and the slit generally does not require secondary processing.

The cutting surface is smooth: the cutting surface has no burrs, and the surface roughness of the cutting surface is generally controlled.

At Ra12.5

Within.


Previous: Difference Between Lucite and Acrylic

Next: No Information