LED Acrylic Trophy

Product description

12.5 cm high x 10.5cm wide

LED base target - 6.5 cm diameter x 3.8 cm high

Total approximate height - 15cm

LED lights cool ways to show off your beloved acrylic designs in 7 different colors or a changing cycle of colors. We have many designs to choose from, but if you don't see anything you like then take a look at the section of the acrylic mirror and we can let you know if we can convert any of them into a lamp for you also for free.

You will receive:

1 acrylic tops of your choice design

1 LED light base for acrylic tops to be used in.

1 USB cable

What you need:

Putting this together (very easy to do) and something to plug new USB cable into a USB port for computers or a USB plug these tend to be free with most devices or can be purchased online or in most high street stores quite cheap.

Please note that these LED bases are not battery powered.

How to use:

Connect one end of the USB cable to the back of the LED light base and the opposite end of your USB slot or connect.

Track acrylic designed tops in the slot on the LED base press firmly.

Press the button on the LED base when and the base station lights up showing solid color.

Pressure and base switch off

Press a 3rd time and the base station lights up with 2 colors.

Continue this process to show all 7 colors available. (current - red, green, blue, yellow, light blue, purple and white)

When the LED base turns white 2 times do not press again. At this point, the LED base will go through all the colors gradually changing from one to another.

ALL LED bases are checked before we send them out, but if there are problems you can contact us within 14 days of receiving you light up.

Cleaning:

Do not use chemicals or cleaning agents on the LED base.

To clean your designed acrylic tops no waxy furniture polishes can be used on both sides. DO NOT use window glass / cleaner as these are for abrasive for acrylic.

Company information